...

Electric Park Brake (EPB)
User Deactivation Instructions
EPB Vehicles Only

ESPB6 is a switch type Electric Park Brake Kit with additional safety features via an additional module.

For Deactivation steps & Auto-Activation features, see below.

Note: Speed Rating safety feature will cut out all "auto-on" features once vehicle is above 12km/h (±2km/h)

  • Deactivation

All actions below need to be in place before EPB can be deactivated via the switch.

ComponentDescription
IgnitionOn Position
DoorMust be closed
Seat BeltMust be on
Foot BrakeFoot must be applied on Pedal
SwitchPush EPB Switch down to release
  • Auto-Activation
In addition to activating the EPB Calipers via the switch, below states the extra safety features.
Component Description
Ignition Car turned off – EPB Activate 1.5 Seconds later
Door When opened, EPB Auto Activate
Park Position Place into Park Position, EPB Auto Activate
Seat Belt Removing Seat Belt, EPB Auto Activate

Deactivation Steps

Step 1 1
Start Vehicle
Turn the ignition on / start the vehicle.
Step 2 2
Close Door
Ensure the driver’s door is fully closed.
Step 3 3
Seat Belt
Seat belt must be on and clipped in.
Step 4 4
Hold Brake
Foot applied onto the brake pedal.
Step 5 5
Release EPB
Push the EPB switch down to release.
Step 6 6
Confirm Release
Check and make sure the hand brake warning light is off on the dash cluster.

Need Assistance?