Skip to main content
Electric Park Brake (EPB)
User Deactivation Instructions
EPB Vehicles Only
ESPB6 is a switch type Electric Park Brake Kit with additional safety features via an additional module.
For Deactivation steps & Auto-Activation features, see below.
Note: Speed Rating safety feature will cut out all "auto-on" features once vehicle is above 12km/h (±2km/h)
- Deactivation
All actions below need to be in place before EPB can be deactivated via the switch.
| Component | Description |
|---|---|
| Ignition | On Position |
| Door | Must be closed |
| Seat Belt | Must be on |
| Foot Brake | Foot must be applied on Pedal |
| Switch | Push EPB Switch down to release |
- Auto-Activation
In addition to activating the EPB Calipers via the switch, below states the extra safety features.
| Component | Description |
|---|---|
| Ignition | Car turned off – EPB Activate 1.5 Seconds later |
| Door | When opened, EPB Auto Activate |
| Park Position | Place into Park Position, EPB Auto Activate |
| Seat Belt | Removing Seat Belt, EPB Auto Activate |
Deactivation Steps
1 Start Vehicle
Turn the ignition on / start the vehicle.
2 Close Door
Ensure the driver’s door is fully closed.
3 Seat Belt
Seat belt must be on and clipped in.
4 Hold Brake
Foot applied onto the brake pedal.
5 Release EPB
Push the EPB switch down to release.
6 Confirm Release
Check and make sure the hand brake warning light is off on the dash cluster.